ProDon:Electronic Transaction Module - PaySafe
Contents
Introduction
The "Electronic Transaction" module allows you to save, cumulate and process transactions paid with credit cards or bank transfers.
Electronic payments can be validated in 2 ways, on every transaction (instant) or in batch (at the desired time).
If the electronic payments are validated in batches, the transactions will be kept in ProDon, until the moment when the batch is sent to Optimal, which will perform verifications on it the night following the transfer.
The electronic payment entry is always done in Optimal's interface and all the information is stored is a secure vault at Optimal. No credit card or CVV number (see Lexicon for definition) will be kept in ProDon.
After entering the payment information on the Optimal interface, a token is returned into ProDon. This token is a unique reference number that is assigned to the credit card information and this token can be kept in ProDon, in order to reuse the payment information for future transactions.
Adding/Editing/Viewing Electronic Transactions
To view the electronic transactions in treatment, go to the "Instant" tab of the "Transaction management".
 | |
|
A: The "To send" tab contains all the transactions to be sent to Optimal. To learn how to process the transactions of this tab, view this section. |
B: The "Awaiting response" tab contains all the transactions that were sent to Optimal for the treatment in batch. To learn how to process the transactions of this tab, view this section. |
|
C: The "Accepted" tab contains all the transactions that were processed by Optimal and that were accepted, you must then transfer them. To learn how to process the transactions of this tab, view this section. |
D: The "Denied" tab contains all the transactions tha were processed by Optimal that were declined. To learn how to process the transactions of this tab, view this section. |
|
E: The "Unknown" tab contains the transactions for which there was a problem during the treatment. If a transaction is found in this tab, contact the technical support at Logilys. |
F: Click on the |
|
G: To view or modify a transaction, double-click on the right transaction. After double-clicking on a transaction, this window opens. |
|
Entering Electronic Transactions
|
After clicking on the | |
 | |
|
A: Search the client for whom an electronic transaction must be added. |
B: Select the desired client. If the client does not exist in ProDon, see point D. |
|
C: After selecting the desired client at B, click on the " |
D: If the client does not exist in the database, click on the " |
|
After double-clicking on a transaction to modify it or after adding a new transaction, the following window opens. NOTE: To learn how to fill out the fields of the transaction, see the "Adding a Transaction" of the "Transaction Logging" document. | |
 | |
|
A: Select an Optimal instant payment method. After selecting an Optimal payment method, a window asking to save is displayed. After clicking on "yes" to save, this window opens. NOTE: When a donation is paid with a credit card from another country, it is required to specify the CVV. However, the CVV payment method is not available here, but it will be be possible to specify it in the Optimal payment zone.. |
B: By adding a transaction, the When modifying a transaction, the |
|
C: After entering all the transaction information, click on the " |
|
Choosing the Electronic Payment Method
|
After selecting an Optimal instant payment method or clicking on the | |
 | |
|
A: By selecting the "Instant payment" option, the transaction is verified immediately and is found under the "Accepted" or "Denied" tabs of the "Transaction management". CAUTION: In the case of a bank transfer, it is possible that the transaction is accepted, because all the banking information is valid. However, it can be declined a few days later on NetBanx, because of insufficient funds. |
B: By selecting the "Batch payment" option, the transaction will be found under the "To send" tab of the "Transaction management", in order to process it later on in a batch. |
|
C: By clicking on the " |
|
Choosing the Registered Token
It is possible the following window opens after clicking on the "Instant payment" or "Batch payment" button. If it is indeed the case, follow these instructions.
If the window that is displayed, after clicking on the "Instant payment" or "Batch payment" button, is not the following, view this section.
|
If a token had already been registered in the client file when entering a prior transaction, the following window opens after clicking on the | |
 | |
|
A: Select the right token in the list. |
B: After selecting the right token, click on the " |
|
C: If the tokens at A do not correspond to the payment method to be used, click on the " |
D: The " |
Entering Payment Information
If a token had already been created in a prior transaction, view this section.
|
After clicking on the "Instant payment" or "Batch payment" button of this window, the following window opens. The information of the client making the transaction should appear automatically. | |
 | |
|
A: This information must be entered, except for the phone number and the email address. |
B: This statement only appears if the "Batch payment" option was chosen in the previous window. In that event, the amount of the transaction will not be withdrawn right away and only a few pieces of information will be validated. To learn more about payments in log, click here. |
|
C: After entering all the information at A, click on the " |
D: By clicking on the " |
|
After clicking on the " | |
 | |
|
A: Verify the information of the transaction. |
B: Enter the payment information. |
|
C: By clicking on the "Return" button, this window opens and the operation is cancelled. |
D: By clicking on the "Pay now" button, the transaction is verified. If the transaction is accepted, this window opens. If the transaction is declined, this window opens. |
|
NOTE: If the entered transaction is in batch, the amount at A will be $1. This amount is actually an authentification that allows for the validation of the card. This amount is not debited, it is only borrowed for more or less 24 hours. | |
Confirming the Transaction Processing
Following the transaction entry, the transaction can be accepted or denied. Here are the instructions to follow in both cases.
Transaction Accepted
|
If the transaction is accepted, the following window opens. | |
 | |
|
Click on the " |
|
After clicking on the " | |
 | |
|
This window allows you to decide whether or not the token of the payment information should be kept in ProDon for future use. By clicking on the " By clicking on the " To learn how to view the payment information in a transaction file, see this section. NOTE: It is not recommended to keep a token only for commitments or if the donor is a regular one. Since the probabilty is that if a donor does not make donations frequently; therefore, his or her credit card will be expired or invalid for a future transaction. |
Transaction Denied
|
If the transaction is declined, a window similar to the folllwing one opens. | |
 | |
|
The " The " NOTE: It is advisable to choose the " |
Cancelling a Transaction
|
After clicking on the "Return" button of this window, the following window opens. | |
 | |
|
Click on the " |
Processing of Instant Transactions
"To send" Tab
If the payment method chosen in this window were "Batch payment", the transaction would be found under the "To send" tab.
This tab contains all the transactions to be sent to Optimal. Therefore, you need to send the transactions to Optimal, which will verify them the night following the transfer.
 | |
|
To send the transactions to Optimal to be processed, click on the If only certain transactions need to be sent, create a filter or a search on the transactions to be sent, then click on the NOTE: The transactions with a later date than the current date can be sent to Optimal, but will be processed only when the transaction date is equal or prior to the current date. |
|
After clicking on the | |
 | |
|
Click on the "Send" button at B, to send the transactions toOptimal. If the checkbox at A is not checked, the transactions will be found in the "Awaiting response" tab, so that can be processed later. If the checkbox at A is checked, the transactions are verified immediately and are found under the "Accepted" or "Denied". NOTE: The checkbox at A is only available for users who have the access to force the immediate treatment. It is not recommended to check this checkbox, because if there are a lot of transactions to process, this operation can take a few minutes. It is therefore advisable to send them under the "Awaiting response" tab, so that Optimal processes them in batches, the night following the transfer. |
"Awaiting Response" Tab
The "Awaiting response" tab contains all the transactions that have a date prior to the current date and all the transactions that were sent to Optimal to be processed in batch.
Optimal usually processes those transactions at 3:00pm and 11:30pm every day.
In order to know the status of the transaction (accepted or denied), you must validate the status of the transactions.
 | |
|
Click on the NOTE: Transactions with a prior date to the current date will stay under this tab until the transaction date becomes equal or later to the current date. |
|
After clicking on the | |
 | |
|
A: The accepted or denied transactions have been verified by Optimal. They will then be found under the "Accepted" or "Denied" tab. | |
|
B: The pending transactions have been verified by Optimal. They will be found under the "Awaiting response" tab. NOTE: The transactions remain pending if they were sent on the same day or if the date of the transaction is later than the current date. |
"Accepted" Tab
The "Accepted" tab contains all the transactions verified by Optimal and that were accepted.
As any other transaction in ProDon (cheque, cash, in-kind gift, etc.), these transactions must be transferred.
 | |
|
To perform a transaction transfer, click on the |
"Denied" Tab
The "Denied" tab contains all the transactions veirfied by Optimal and that were declined.
Each denied transaction contains an error code. To view this error code, display the "English message (InstantPay.)" in the view.
In certain situations, you will have to contact the donor so that he or she sees with his or her issuing bank why the transaction did not go through and in other situations, the organization could have to contact Optimal.
 | |
|
To open a rejected transaction to be processed, double-click on the right transaction. See the "Processing the Rejects" section to learn how to process denied transactions. |
Processing the Rejects
There are 2 ways to process a denied transaction:
In the case, for instance, of an error in the entry of a credit card number or of the donor's information, it is required to empty the payment information and to enter it again (after revalidating the payment information with the donor). To learn how to process this type of reject, click here.
In other cases, (e.g. insufficient funds or a refusal from the issuing bank), you simply need to send the instant payment again, after making sure with the donor, that he or she indeed wants the transaction to go through again. To learn how to process this type of reject, click here.
Emptying the Payment Information and Entering it Again
If the reject requires to empty the payment information and to enter it again, follow these instructions.
Otherwise, click here.
|
After double-clicking on the denied transaction, the following window opens. | |
 | |
|
To enter the right payment information, click on the |
Sending the Instant Payment Again
If the reject only requires to send the payment information again, follow these instructions.
Otherwise, click here.
The payment information can be sent again from 2 locations:
- "Referral of the Payment Information from the "Denied" Tab of the Transaction Management";
- The Transaction Edit File.
Referral of the Payment Information from the "Denied" Tab of the Transaction Management
From the "Denied" tab of the transaction management, it is possible to send all the payments at the same time or one at a time.
 | |
|
To revalidate one or more instant payment(s), filter the payment(s) to be sent and click on the |
|
After clicking on the | |
 | |
|
Decide whether only the selected transaction should be returned or all the transactions from the list. After selecting the right option, click on " |
|
After clicking on the " | |
 | |
|
Click on the "Send" button at B, to send the transactions to Optimal. If the checkbox at A is not checked, the transactions will be found under the "Awaiting response" tab, so they can be processed later. If the checkbox at A is checked, the transactions will be verified immediately and will be found under either the "Accepted" or the "Denied" tab. NOTE: The checkbox at A is only available for users who have access to force the immediate processing. It is not recommended to check this checkbox, because if there are many transactions to process, this operation can take a few minutes. It is therefore advisable to send them under the "Awaiting response" tab, so that Optimal can process them in batch, the night following the transfer. |
Referral of the Payment Information from the Transaction Edit File
|
Après avoir double-cliqué sur la transaction refusée, la fenêtre suivante s'ouvre. | |
 | |
|
Pour revalider les informations de paiement, cliquer sur le bouton |
Viewing the Tokens
La saisie des informations de paiement électronique est toujours effectuée dans l'interface d'Optimal et toutes ces informations sont stockées dans une voute sécurisée chez Optimal. Aucun numéro de carte de crédit ou de CVV (voir le lexique pour définition) n’est conservé dans ProDon. Après la saisie des informations de paiement sur l'interface Optimal, un jeton est retourné dans ProDon. Ce jeton est un numéro de référence unique assigné aux informations de la carte et c'est ce jeton qui peut être conservé dans ProDon, afin de réutiliser les informations de paiement pour des transactions ultérieures.
Il est possible de consulter ces jetons à partir de 2 endroits dans ProDon :
In the Transaction File
|
Le jeton de la fiche de la transaction se consulte en cliquant sur le bouton | |
 |
In the Client File
|
Les jetons de la fiche du client se consultent dans l'onglet « 11 - Paiements instantanés ». | |
 | |
|
NOTE : Pour que les jetons soient conservés dans la fiche client, il faut avoir répondu « Oui » à cette question. |
Document name: ProDon:Electronic Transaction Module - PaySafe
