ProDon:Customized Lists

Introduction

The customized list tool allows you to create clients lists. Once created, these clients lists are saved and can be viewed again at will. They can also be combined with one another and can be modified or deleted if desired. Although it is possible to create lists somewhere else than in the "Client management", they still are clients lists.

The button allows you to create a customized list and can be found in the following ProDon managements:

• Client management
• Task and history management
• Analysis and history
• Receipts to be issued
• Documents to be issued

There are two types of customized lists: static lists and dynamic lists.

Static lists remain the same and always contain the same clients (e.g. a list people having received a particular letter), whereas a dynamic list is automatically modified by ProDon each time a client enters the requested criteria (e.g. all the clients who gave $1,000 or more in a lifetime). To be noted that the dynamic lists are only available in the "Client management".

Customized lists can be based on precise clients (e.g. all clients, potential duplicates, etc.) AND on different criteria. Therefore, a list is created from certain clients (or all clients) who meet certain criteria.

Preparing the Active List

As stated in the introduction, customized lists can be created from different ProDon managements. Although each grid contains different elements (Client management = clients, Analysis and history = transactions, etc.), the result of a list will always be a clients list.

Example of an active list containing all the clients of the "Client management", no search or filter have been applied.

For instance, after searching for the clients living in Toronto, the number of items onscreen has decreased, but it still is the active list on which the customized list will be based.

Creating Customized Lists

After configuring the active list in the chosen management, click on the button that is at the top of the window, in order to write the criteria in the customized list.

In the "Client management", two options are available: "Static lists" and "Dynamic lists". In all other managements, only the option "Static lists" is available, so no choices are offered.

In the customized lists tool, it is possible to create, edit and remove lists. However, to be able to view them onscreen again or to combine lists together, see the "Viewing / Filtering Customized Lists" section.

Static List (main window)

Static listsremain the same and always contain the same clients. It is sometimes necessary that a list remains the same, for instance, people having received a particular letter for a specific donation occasion. This list must be fixed and cannot change.

After clicking on the button and choosing the "Static lists" option, this window opens.
A: These are the choices of clients who could be assigned to a static customized list. For more details, consult this section.	B: By checking this box, the clients excluded from the E-mail Blast who meet the selected criteria will be added to the list.
C: The buttons , and allow you to add a new list, to modify the name of a list or to remove a customized list.	D: These are choice lists already created. By clicking on the drop-down menu, all the existing  cutomized lists are present. To modify an existing list, select it, then follow the instructions of the section "Static list/Modifying an existing list (Add or remove clients)".
E: Allows you to edit the criteria for the customized list. The criteria to be edited will change based on the chosen criterion of static customized list.	F: Depending on the choice selected in A, this button will be visible or not. If it is visible, by clicking on it, the number of clients, according to the chosen criteria, will be indicated.
G: Always considering the criteria selected in A, this button allows you to add to an existing list the clients of the active list shown onscreen, OR allows you to add to an existing list the clients of the active list meeting the criteria edited in E, OU allows you to add a new list of clients from the active list corresponding to the selected criteria.	H: Always considering the criteris selected in A, this button allows you to remove from an existing list the clients of the active list shown onscreen, OR allows you to remove from an existing list the clients of the active list meeting the criteria edited in E.
I: Allows you to empty the chosen existing list before adding the client(s) with the selected criteria. CAUTION: By clicking on G, this feature will erase the clients previously contained in this list and will modify it with the new corresponding client(s).	J: Automatically displays onscreen the result of the modified list. NOTE: It is strongly recommended to leave this checkbox unchecked at all times not to lose the previous active list onscreen. To learn how to view or revise the customized lists onscreen, see this section.

Customized Static List Criteria

There are seven types of static customized lists and each type contains different criteria. Here they are:

• All client in the active list
• All third-party clients of the acitive list
• All clients in the active list that meet certain donation criteria
• All clients in the active list that meet certain mailing criteria
• All potential duplicate clients in the active list
• All clients linked to a client in the actiive list that meet certain link criteria
• Only the selected client

All clients of the active list

Allows you to include all the clients who are currently in the active list.

This type of customized list is useful if all the clients to be added or removed from a list are already isolated in the active list.

After choosing "All clients in the active list" in A, determine what must be done by following the instructions in the main window "Static list (main window)".

All third-party clients of the active list

Only available in some tabs of "Analysis and history" and allows you to extract all third-party clients registered in the transactions of the active list.

After choosing "All clients in the active list" in A, determine what must be done by following the instructions of the main window "Static list (main window)".

All clients of the active list meeting certain donation criteria

Allows you to include the clients fin the active list who correspond to certain gift criteria.

This window appears after choosing "All clients in the active list that meet certain gift criteria in A, determine what must be done in C, then click on the "Edit criteria" button in E. In this window, you must select the desired options in order to target clients in relation with a transaction history.
CAUTION: Only the clients who are part of the active list created earlier and who correspond to all the criteria entered in this window will be found.
A: Allows you to base your search on a received amount of money.	B: Allows you to base your search on an amount relating to the receipts issued to the clients.
C: This option is not available in the first criterion. It allows you to target a variation relating to the previous criterion. For instance, if $50 were entered, the clients who gave $50 more or less in a donation occasion compared with another would be have been found.	D: Allows you to specify the number of instalments to reach the amount targeted in A or in B. For instance, if the amounts indicated in A had been $500 to $1,000 and that a minimum of 1 transaction and a maximum of 2 transactions would have been defined, a client having made 3 transactions of $200 could not be found.
E: Allows you to base your search on the highest transactions  to reach the amount targeted in A or in B. For instance, if the amounts indicated in A had been $500 to $1,000 and that only the 2 highest transactions of the clients would be considered, a client for whom the 2 highest transactions are $500 and $600 would not be found.	F: Allows you to define the interval of dtaes (according to the periods created in ProDon) in which the transactions msut have been made.
G: Depending on the period selected in F, the dates will be modified automatically. It is also possible to define the dates manually, in that event, the F field will become empty and ProDon will refer to the dates entered here.	H: Allows you to choose for which organization the transactions have been made. NOTE: This option is available only if the multiorganization module is activated.
I: Allows you to	J: Allows you to decide whether the search should be based on all the transactions or if it should be based on donation occasion(s), campaigns or activities in particular.
K: Allows you to include or not the commitments.	L: Allows you to base the search on origin code(s).
M: Depending on the type of selection chosen in J, the and buttons and the boxes on the left will be available or not. The button allows you to check all the boxes to the left of of the buttons and the allows you to uncheck them all. It is also possible to select one by one the donation occasions, activities or campaigns that should be considered in the search. In the example above, all the clients who gave less than $1 in either donation occasions will be found.	N: These 4 checkboxes allow you to choose the type of transactions to include in the search.
O: The buttons " Add criterion" and " Delete criterion" aalow you to add or delete a criterion. In this example, there are two criteria. The number of criteria is visible from the tabs in the upper-left of the window. By adding a criterion you must go in the tab to configure criterion 2, 3, etc. To delete a criterion, select the tab of the criterion, then click on the " Delete criterion" button.	P: When all the criteria are selected, click on " OK".
NOTE: For points D and E, the "0" indicate that the box should not be considered. Therefore, if "0" is entered in D, this field will not be considered. In E, for instance, if the minimum is "2", but there is no maximum, you must enter a maximum of "0" and if the minimum is "10" but there is no minimum, you must enter a minimum of "0".

After clicking on " OK", ProDon will go back to the main menu screen. To resume the customized list, see points F, G, H, I and J of the "Static List (main window)" section.

All clients of the active list meeting certain mailing criteria

Allows you to include the clients of the active list who correspond to certain mailing criteria.

A list by mailing criterion mainly allows you to find all the clients who have not responded following a mailing, in order to solicit them again. This type of list is also useful to find the clients who responded positively , or to find the clients who have not received a mailing.

To use the customized list of the clients meeting certain mailing criteria, it is important that the mailing histories have been adequately documented in the database. To learn how to use the mailing history, consult this document.

This window opens after selecting "All clients in the active list that meet certain mailing criteria" in A, determine what must be done in C, then click on the "Edit criteria" button in E. In this window, you must select the desired options in order to target clients by mailing history report.
CAUTION: Only the clients who are part of the active list created earlier and corresponding to the criteria entered in this window will be found.
A: Enter the date when the mailing has been done. If no date is to be considered for the search, simply leave this space blank.	B: Select the organization for which the mailing has been done. NOTE: This option is available only if the multiorganization module is activated in the database.
C: Select the donation occasion for which the maling has been done. If no donation occasion is to be considered, simply leave this box empty.	D: Select the activity for which the mailing has been done. If no activity is to be considered for the search, simply leave this box empty.
E: Enter the cancasser of the mailing, if desired.	F: Select the "response value" of the mailing history to be considered for the search according to the configuration of default responses. In this example, "No answer" means that I want to search the clients to whom I have sent a solicitation, but for which I did not get any response; all this aiming at sending a second mailing.
G: Enter the description of the mailing that was sent, if desired.	H: Allows you to search the mailings for which no activity had been specified. NOTE: If D is empty and that this box is not checked, the mailings for which no activity had been specified and the mailings for which any activity had been specified will be found. If D is empty and that this box is checked, only the mailings with no activity specified will be found.
I: The reversed search allows you to find all the clients who do not correspond to all the entered criteria.	J: This option allows you to include, in addition to the clients who meet the edited criteria, all the clients with no mailing documented.
K: The buttons " Add criterion" and " Delete criterion" allow you to add or remove a criterion. In this example, there is only one criterion. The number of criteria is visible from the tabs at the upper-left of the window. By adding a criterion, you must go in the tab to configure criterion 2, 3, etc. To delete a criterion, select the tab of the criterion, then click on the " Delete criterion" button.	L: When all the criteria are selected, click on       " OK".

After clicking on " OK", ProDon will go back to the main menu screen. To continue the customized list, see points F, G, H, I and J of the "Static List (main window)" section.

All clients of the active list who are potential duplicates

Allows you to find the clients who potentially are more than once in the database from an active list.

There is a duplicate when there is more than one client file for the same client.

To learn how to use this type of customized list, consult the "Searching and Eliminating Duplicates" procedure.

All clients who are linked to a client of the active list according to link criteria

Allows you to include the clients in the active list corresponding to certain types of links between client files.

A list by link criteria is used to find all the clients linked to one of the clients in the active list. For example, if the active list consists of of five client files of schools in which exist links to students, it would be possible to find all students of either of the five schools. Or, if the active list consists of all the students' client files of one school, in which exist the links to their parents, it would be possible to find all the students' parents of the school.

To use this type of customized list by link criterion, all the links must have been documented in the database. To learn how to add contacts linked to client files, consult the "Contacts and Links" document.

This window opens after selecting "All clients in the active list that meet certain link criteria" in A, determine what must be done in C, then click on the "Edit criteria" button in E.
A: Allows you to indicate the type of link to search.	B: Allows you to use the link in both directions. In this example, the employees or employers linked to client files in the active list would be found.
C: Alows you to add to the customized list, the clients in theactive list, in addition to the clients meeting the entered criteria.	D: Allows you to use the reverse link. I this example, the employees linked to the client files of the active list would be found rather than their employers.
E: Indicates the result of the search of the link that had been found.	F: When all criteria are selected, click on " OK".
NOTE: The quote in E changes, if the options in B or D are checked.

After clicking on " OK", ProDon will go back to the main menu screen. To continue the customized list, see points F, G, H, I and J of the "Static List (main window)" section.

The selected client only

Allows you to only the client of the active list who is selected.

This type of customized list is useful if a client must be added or removed from an existing customized list, or if a new list to which it is necessary to add clients one by one to be created.

However, to add or remove clients individually, it is rather preferable to proceed directly from the client file.

To learn how to add or remove a client in a customized list from the client file, consult this section.

Static List / Adding a New List

To create a new static customized list, go to the management proper to the type of list to be created (client management, analysis and history, etc.), then prepare the active list of the clients who must be in the new customized static list. Once the active list is created, click on the button, which is at the top of the window, then select "Static list".

After clicking on "Static list", this window opens.
A: Select the desired option. For more details, see point A of the "Static List (main window)" section.	B: Choose to check the box or not. For more details, see point B of the "Static List (main window)" section.
C: Click on the button. NOTE: A window opens, for you to learn how to fill it in, click here.	D: After clicking on the " Confirm adition" of this window, the name of the new list will be entered in that field.
E: Click on this button to edit the criteria of the new customized list. For more details, see point E of the "Static List (main window)" section.	F: Depending on the choice selected in A, this button will be visible or not. If it is visible, by clicking on it, the number of clients to be added to the list will be indicated.
G: Once steps A, B, C, D and E are completed, click on " Add to clients list" to add the clients meeting the edited criteria.	NOTE: To see the new customized list onscreen, consult the "Viewing/Filtering Customized Lists" section.

After clicking on the button in order to create a new customized static list of clients, this window opens.
A: Name the new customized list. NOTE: The name given here must be meaningful since this list will be saved for future consultation.	B: It is not possible to modify the list type from this window.
C: Click on " Confirm addtion" to add the customized list.	D: Click on " Cancel new record" to cancel the addition to the current customized list.
After clicking on " Confirm addition" or on " Cancel record", ProDon goes back to this screen. Carry on with the instructions from point D.

Static List / Modifying an Existing List (Add or remove clients)

To modify an existing customized static list, go to the proper management (client management, analysis and history, etc.) in order to find the list to be modified, then prepare the active list of the clients who have to be added or removed from the existing list. Once the active list is created, click on the  button, that is at the top of the window, then select "Static list".

After clicking on "Static list", this window opens.
A: Select the desired option. For more details, see point A of the "Static list (main window)" section.	B: Choose to check the box or not. For more details, see point B of the "Static list (main window)" section.
C: Using the drop-down list, select in the customized list in which they should be added or removed.	D: Click on this button to edit the criteria of the customized list chosen at C. For more details, see point E of the "Static list (main window)" section.
E: Depending on the option selected in A, this button will be visible, by clicking on it, the number of clients will be added or removed from the list will be indicated.	F: To modify the customized list by adding clients, once steps A, B, C and D are completed, click on " Add to the client list" to add the clients with the selected criteria in the list chosen at C.

Viewing / Filtering Customized Lists

---

Document name: ProDon:Customized Lists

Printable version